Stone Design is one of four unique surface finishes available for Triflex ProTerra and features 6 variants of Italian marble. The stone finish incorporates a UV-resistant, non-yellowing resin, protecting the system for years to come.
System build-up
Primer
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Triflex Cryl Pinhole Paste
Solution to help prevention of pinholes in outgassing cementitious substrates.
Consumption: Approx. 0.25 - 0.30Kg/m2 in one step with primer. Approx. 0.40Kg/m2 in first and approx. 0.15 - 0.30Kg/m2 in second working step without primer
Reinforced waterproofing (single process)
ProTerra
Reinforced with Triflex 110g Reinforcement
Overcoat / traffic: 1 hour
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Embedment layer
Cryl Finish 205
Overcoat / traffic: 1 hour
Consumption: 0.50Kg/m²
Quartz 0.3 - 0.6mm: 2.00Kg/m² approx.
Surface layer
Stone Design RS
Two component resin and stone combined to create the surface variant Triflex Stone Design
Resin: 0.80 Kg/m²
Stone: 14.40 Kg/m²
For Triflex Stone Design upstands
Triflex Thixo SD is used with Triflex Stone Design R 1K and Triflex Stone Design S for the production of highly stable, vertical upstands of the Triflex Stone Design surface variant.
Download
Finish options
Triflex ProTerra with Stone Design is available in 6 variants of Italian marble, allowing the system to be tailored to meet aesthetic and project needs.
Finish colour: Bardiglio
