Triflex ProDrain offers a safe, clean solution for saturated or contaminated substrates. Featuring a self-supporting isolating and venting sheet that enables the subsequent Triflex ProTerra waterproofing and surfacing system to be applied directly over it.
System build-up
ProDrain Primer
Triflex ProDrain Primer
Primer is used as a primer on cementitious substrates in conjunction with the Triflex ProDrain system.
Consumption: 0.15l/m²
Decoupling membrane
DC-MAT Decoupling membane
Used in conjunction with Triflex ProDrain Fix+.
Adhesive: 3.00Kg/m²
Membrane: 1.00m²/m²
Overcoat / traffic: 1 hour
Triflex ProDrain Fix+
Vapour permeable adhesive used to bond the Triflex DC-Mat Decoupling Membrane to the substrate as part of the Triflex ProDrain system.
Able to withstand stress: 1-3 days
Consumption: 4.50Kgm/²
Load distribution layer
Triflex Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.55Kg/m² x2 applications to deliver 1.10Kg/m²
Waterproofing and surfacing system
Available in four surface finishes - refer to relevant Triflex ProTerra system overview:
Available in four surface finishes - refer to relevant Triflex ProTerra system overview:
Finish options
Triflex ProTerra Insulated is available with a wide range of finish options including Quartz Design, Colour Design and Chips Design and over 50 finish colours. The system can be tailored to meet aesthetic and project needs with special colours being produced to order.