Triflex Quartz Design features a high quality, anti-skid quartz and a durable coloured finish. With a choice of four quartz aggregate sizes providing a range of textures and over 50 standard colours it is easy to see why this versatile finish is our most popular.
System build-up large grain quartz
Anti-skid
Tests carried out wet on new indicative samples in accordance with UKSRG Guidlines (2016). Based on UKSRG guidance a surface with a PTV of 36+ is classified as having a low slip potential.
With 0.7 - 1.2mm quartz:
- PTV approx. 75 (Four S rubber / Slider 96)
- PTV approx. 68 (TRRL rubber / Slider 55)
With 0.4 - 1.2mm quartz:
- PTV approx. 73 (Four S rubber / Slider 96)
- PTV approx. 70 (TRRL rubber / Slider 55)
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Reinforced waterproofing (single process)
ProDetail
Detail waterproofing resin used with Triflex 110g Reinforcement.
Overcoat / traffic: 1 hour
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Waterproof surfacing layer (treads only)
ProFloor
Waterproof surfacing layer used in Triflex walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 4.00Kg/m²
Aggregate: Large grain quartz: 6.00Kg/m²
Finish
Cryl Finish 205
Finish for Triflex roofing, walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 0.50Kg/m² - 0.60Kg/m²
Optional: Triflex Microchips
System build-up small grain quartz
Anti-skid
Tests carried out wet on new indicative samples in accordance with UKSRG Guidlines (2016). Based on UKSRG guidance a surface with a PTV of 36+ is classified as having a low slip potential.
With 0.4 - 0.8mm quartz:
- PTV approx. 62 (Four S rubber / Slider 96)
- PTV approx. 58 (TRRL rubber / Slider 55)
With 0.3 - 0.6mm quartz:
- PTV approx. 61 (Four S rubber / Slider 96)
- PTV approx. 42 (TRRL rubber / Slider 55)
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Reinforced waterproofing (single process)
ProDetail
Detail waterproofing resin used with Triflex 110g Reinforcement.
Overcoat / traffic: 1 hour
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Waterproof surfacing layer
ProFloor
Waterproof surfacing layer used in Triflex walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 4.00Kg/m²
Embedment layer
Cryl Finish 205
Finish for Triflex roofing systems and walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 0.60Kg/m² min.
Aggregate: Small quartz 5.00Kg/m² approx.
Finish
Cryl Finish 205
Finish for Triflex roofing systems and walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 0.50Kg/m².
Optional: Triflex Microchips
Finish colours
Triflex StairCoat Reinforced with Quartz Design is available in a range of over 50 finish colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.