Triflex Chips Design is a low maintenance, durable coloured finish with decorative anti-slip chips. With a range of over 50 standard colours, there are countless possibilities available, enabling you to create a tailored solution for your project.
- PTV approx. 39 (Four S rubber / Slider 96)
- PTV approx. 35 (TRRL rubber / Slider 55)
System build-up
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Reinforced waterproofing (single process)
ProDetail
Detail waterproofing resin used with Triflex 110g Reinforcement.
Overcoat / traffic: 1 hour
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Waterproof surfacing layer (treads only)
ProFloor RS
Waterproof surfacing layer used in Triflex walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 4.00Kg/m²
Finish
Cryl Finish 205
Finish for Triflex roofing, walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 0.50Kg/m²
Finish colours
Triflex StairCoat Reinforced with Chips Design is available in a range of over 50 finish colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.