Triflex ProTerra Buried Heavy Duty provides a tough, robust waterproofing solution for fixed or bonded coverings and to protect areas where further impact and abrasion resistance is required.
System build-up
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Reinforced waterproofing (single process)
ProTerra
Reinforced with Triflex 110g Reinforcement
Overcoat / traffic: 1 hour
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Heavy duty wearing layer
ProTerra
Overcoat / traffic: 1 hour
Consumption: 1.50Kg/m² min.
Aggregate: Quartz 0.7-1.2mm: 6.00Kg/m²
Resin colour
Triflex ProTerra Buried is available in 7032 Pebble grey.
