Triflex SmartTec can be used for standard roofing and details to basement and foundation waterproofing. Being virtually odourless the system is ideal for hospitals, nurseries, food processing and other sensitive areas and is particularly suitable for damp cementitious and other substrates.
System build-up
Primers (if required)
Primer 610
Primer for single-ply membranes, liquid coatings and coated metals.
Overcoat / traffic: 20 minutes
Consumption: 0.06L/m² min.
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Than Primer 533
Primer for PVC substrates for Triflex SmartTec systems
Overcoat / traffic: 20 minutes
Consumption: 0.10L/m² minimum
Triflex Bitumen Blocker
Primer for Triflex SmartTec only for bituminous substrates to eliminate bitumen staining/bleeds.
Rainproof / overcoat: Approximately 4 hours
Consumption: 0.40Kg/m²
Triflex TecGrip 620
Primer and adhesion promoter for use with Triflex SmartTec. This product can be used to pre-treat SmartTec layers where lapping to material that is 24 hours old and up to 100 days old.
Consumption: Approx. 0.10 L/m² on a smooth, even surface
Reinforced waterproofing (single process)
SmartTec
Virtually odourless, solvent free waterproofing resin used with Triflex 110g Reinforcement.
Overcoat / traffic: 8 hours
Consumption: 3.00Kg/m² min.
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Resin colours
Triflex SmartTec is available in multiple standard resin colours.
