Triflex ProFibre is a fibre reinforced variant of Triflex ProDetail which is ideal for intricate details that are difficult to access or cannot be practically waterproofed using fabric reinforcement.
System build-up
Primers (if required)
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Primer 610
Primer for single-ply membranes, liquid coatings and coated metals.
Overcoat / traffic: 20 minutes
Consumption: 0.06L/m² min.
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Glass Primer
Primer for glass substrates.
Overcoat / traffic: 20 minutes
Consumption: 0.05L/m² approx.
Reinforced waterproofing
ProFibre
Fibre reinforced detail waterproofing resin for highly complex and difficult to access details.
Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m² min. (total)
Resin colours
Triflex ProFibre is available in 4 standard resin colours.
For an enhanced range of over 50 colours why not take a look at Triflex ProFibre with a coloured finish which allows the system to be tailored to meet aesthetic and project needs. Additionally, special colours can be produced to order.