Triflex ProDetail with a coloured finish allows detailed areas to be waterproofed to the same visual impression as our main area waterproofing systems, allowing them to suite perfectly and can be used locally for demarcation or logos.
System build-up
Primers (if required)
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Primer 610
Primer for single-ply membranes, liquid coatings and coated metals.
Overcoat / traffic: 20 minutes
Consumption: 0.06L/m² min.
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Glass Primer
Primer for glass substrates.
Overcoat / traffic: 20 minutes
Consumption: 0.05L/m² approx.
Reinforced waterproofing
ProDetail
Detail waterproofing resin used with Triflex 110g Reinforcement.
Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Finish
Cryl Finish 205
Finish for Triflex roofing systems and walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 0.50Kg/m² min.
Details greater than 250mm high, use Triflex Thixo.
Finish colours
Triflex ProDetail with a coloured finish is available in a wide range of optional finish colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.