BBA
British Board of Agrément certified no. 13/5051 Product sheet 9
Certified for use on:
- Flat (including zero fall roofs)
- Pitched roofs with limited access
Durability – under normal service conditions, the system will have a service life in excess of 25 years
ETAG 005
European Technical Approval Guideline 005 Liquid Applied Roof Waterproofing Kits certified no. 17/0284 (under Triflex SmartTec brand)
Highest classification in all test criteria:
- Working life: W3 (25 year durability)
- Climatic zones: M and S (Moderate to Severe)
- Imposed loads: P1 to P4 (Low to Special)
- Roof slope: S1 to S4 (<5% to >30%)
- Minimum surface temperature: TL4 (down to -30°C)
- Maximum surface temperature: TH4 (up to +90°C)
- Resistance to wind loads >50 kPa o Statement on dangerous substances - none contained
- External fire performance class BROOF(t1), BROOF(t2), BROOF(t3) and BROOF(t4)
- Reaction to fire Euroclass E
ETA certification under ETAG 005 includes crack bridging tests under TR008 ‘Determination of the resistance to fatigue movement’ which tests cyclic crack bridging ability from 0mm to 2mm at -10°C. To achieve the W3 (25 year durability) statement under the ETA, the Triflex RoofTec / SmartTec system has successfully undergone this testing for 1,000 cycles
FLL
FLL ‘Green Roof Guidelines - Guidelines for the Planning, Construction and Maintenance of Green Roofs’ certified
- Root and rhizome resistant
EN 13501-5
EN 13501-5:2016 Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests certified
- A composite build-up comprising 18 mm thick plywood primed with Triflex FastPrime, a layer of a self-adhesive vapour control layer, 120 mm thick PIR Insulation board bonded to a vapour control membrane with a two-component PUR adhesive, and layer of Triflex RoofTec applied at a rate of 3 kg/m2, was classified in accordance with BS EN 13501-5 : 2005 as European Class BROOF(t4).
- In addition, the system achieves the system achieves BROOF (t1) German test method, (t2) Scandinavian test method and (t3) French test method (under Triflex Smart Tec brand).
EN 13501-1
EN 13501-1:2018 Fire classification of construction products and building elements. Classification using data from reaction to fire tests certified
- Class E (under Triflex Smart Tec brand).
BS 476-3
BS 476-3:2004 Fire tests on building materials and structures. Classification and method of test for external fire exposure to roofs certified
- A composite build-up comprising 18 mm thick plywood primed with Triflex FastPrime, a layer of a self-adhesive vapour control layer, 120 mm thick PIR Insulation board bonded to a vapour control membrane with a two-component PUR adhesive, and layer of Triflex RoofTec applied at a rate of 3 kg/m2, when tested in the flat position in accordance with BS 476-3 : 2004 achieved an EXT.F.AA rating.
VOC emissions
VOC Emission Test Report Indoor Air Comfort GOLD®
- Indoor Air Comfort® - Pass
- Indoor Air Comfort GOLD® - Pass
- BREEAM International - Compliant (GN22 v2.2: BREEAM Recognised Schemes for VOC Emissions from Building Products)
- LEED v4 (outside U.S) – Compliant
- French VOC Regulation – A+
- French CMR components – Pass
- agBB/ABG – Pass o Belgian Regulation – Pass
- EN 717-1§ – E1
- BREEAM® NOR - Pass
NHBC Standards 2018
Based on BBA certificate no. 13/5051 Product sheet 9
- In the opinion of the BBA, Triflex RoofTec, if installed, used and maintained in accordance with this Certificate, can satisfy or contribute to satisfying the relevant requirements in relation to NHBC Standards, Chapter 7.1 Flat roofs and balconies.
Manufacturer certification
- ISO 9001 Quality Management
- ISO 14001 Environmental Management
- ISO 50001 Energy Management