Triflex Line Cold Plastic is a cold liquid applied, exceptionally fast curing, heavy duty marking system. Originally designed for highway use, it is also used to add coloured, thick layer, anti-skid markings to car parks, service yards and other heavily trafficked areas.
- PTV approx. 67 (TRRL rubber / Slider 55)
- PTV approx. 63 (Four S rubber / Slider 96)
System build-up
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Than Primer L 1K
Single component primer for concrete and cementitous substrates prior to installation of Triflex marking systems.
Drying time: 20 - 30 minutes approx.
Consumption: 0.20Kg/m² minimum.
Marking
Line Cold Plastic (Kaltplastik)
Heavy duty marking system.
Curing time: 15 - 20 minutes approx.
Consumption: 4.50Kg/m²
Colours
Triflex Line Cold Plastic is available in a wide range of colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.